- 140 Nm peak torque The highest peak rating of any Xynova module that still weighs 1.2 kg, giving margin for an extended arm under load.
- 117 Nm/kg torque density Strength per kilogram matters at the shoulder, where added mass has to be moved by every joint behind it.
- 21:1 planetary gearbox An in-house reduction designed for burst motion, with a tooth profile and load-balanced gear set intended to cut vibration and noise.
- 130 rpm no-load output Roughly four times the speed of the high-ratio leg modules, which suits arm motion rather than slow, heavy lifting.
- 16-bit encoder feedback Supports repeatability of 0.1° or better, matching the finer-resolution modules on settled accuracy.
- Thermally engineered winding Electromagnetic and thermal co-optimisation, a proprietary winding process and integrated cooling channels are used to sustain torque output.
Description
Shoulders and elbows carry the working loads of a humanoid arm, and they repeat them all day. The PR21-100-140-HS is the mid-range Xynova joint module built around that duty: 140 Nm of peak torque through a 21:1 planetary gearbox, 130 rpm at no load, and a total mass of 1.2 kg in a Ø100 × 61.7 mm housing.
At 117 Nm/kg it is the strongest module Xynova offers below the leg-joint sizes, and it is the torque leader among the 1.2 kg units. Feedback comes from a 16-bit encoder, enough for repeatability of 0.1° or better, and the input is the same 48 V bus used across the rotary range.
The decision between this module and the PR20-102-130-HS is a straight torque-against-speed trade at identical mass. This one gives roughly eight per cent more peak torque; the PR20 is about fifteen per cent faster, resolves position on 17 bits and is 2.7 mm shorter. If the limiting number in your sizing calculation is the torque at a fully extended arm, this is the module to specify.
The torque figure is a peak rating rather than a continuous one, and 130 rpm is a no-load figure. Rated continuous torque, speed under working load, rated current, the communication interface and the meaning of the HS suffix are all confirmed with the quotation.
Key Capabilities
- 140 Nm peak torque: The highest peak rating of any Xynova module that still weighs 1.2 kg, giving margin for an extended arm under load.
- 117 Nm/kg torque density: Strength per kilogram matters at the shoulder, where added mass has to be moved by every joint behind it.
- 21:1 planetary gearbox: An in-house reduction designed for burst motion, with a tooth profile and load-balanced gear set intended to cut vibration and noise.
- 130 rpm no-load output: Roughly four times the speed of the high-ratio leg modules, which suits arm motion rather than slow, heavy lifting.
- 16-bit encoder feedback: Supports repeatability of 0.1° or better, matching the finer-resolution modules on settled accuracy.
- Thermally engineered winding: Electromagnetic and thermal co-optimisation, a proprietary winding process and integrated cooling channels are used to sustain torque output.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Type | Integrated planetary joint module |
|---|---|
| Model | PR21-100-140-HS |
| Peak torque | 140 Nm |
| No-load speed | 130 rpm |
| Gear ratio | 21:1 |
| Torque density | 117 Nm/kg |
| Weight | 1.2 kg |
| Size | Ø100 × 61.7 mm |
| Encoder resolution | 16-bit |
| Repeatability | ≤0.1° |
| Input voltage | 48 V DC |
| Rated continuous torque | Confirm at quote |
| Rated current | Confirm at quote |
| Communication interface | Confirm at quote |
| HS suffix definition | Confirm at quote |
| Price | Quotation only |
Industries
Frequently Asked Questions
It suits loaded shoulders and elbows, waist and neck yaw axes, and hip or knee joints on lighter legged platforms where 140 Nm of peak torque is enough.
140 Nm of peak torque, 130 rpm at no load, a 21:1 gear ratio, 1.2 kg of mass and a torque density of 117 Nm/kg.
Same 1.2 kg mass. This module has about eight per cent more peak torque; the PR20 runs about fifteen per cent faster, uses a 17-bit encoder and is 2.7 mm shorter.
No. That is the no-load output speed. Speed at working torque depends on the motion profile, and the rated continuous figures are confirmed with the quotation.
It is quoted per project — quantity, configuration and delivery determine the figure.
A 48 V DC supply, the same input as every other rotary actuator in the Xynova range.
Recently Viewed
You haven't viewed any products yet.
