- Extends the link where there is no network A robot-carried relay station builds out a COFDM mesh so video and control reach back to the operator from places with no coverage of their own.
- 64 nodes and more than ten hops Networking capacity is 64 nodes or more with routing over more than ten hops, in centreless, star, chain or mesh topologies.
- 52 Mbps peak, 92 Mbps optional Peak capacity is 52 Mbps on a 20 MHz carrier, and an optional version is rated to 92 Mbps.
- 4 W transmit power at 1300–1500 MHz Receiver sensitivity is −100 dBm at 5 MHz, with carrier bandwidth configurable at 5, 10 or 20 MHz.
- Rejoins the network in five seconds A unit joins the mesh within five seconds of a warm boot, which matters when nodes move in and out of range during a task.
- Optional AES256 encryption DES, AES128 and AES256 are offered as options where the traffic has to be protected.
- Modest power budget The station runs on DC 12 V with typical consumption at or below 21 W and peak consumption at or below 35 W.
Description
This is a COFDM mesh radio relay station carried by the Deep Robotics X30 or M20. Its job is to keep a link alive where there is no network to use: a robot walks into a tunnel, a basement, a damaged building or a plant with no coverage, and the relay extends the mesh behind it so video and control keep flowing back to the operator.
It works in the 1300–1500 MHz band with 5, 10 or 20 MHz carriers, adaptive BPSK, QPSK, 16QAM and 64QAM modulation, 4 W of transmit power and −100 dBm receiver sensitivity at 5 MHz. Peak capacity is 52 Mbps on a 20 MHz carrier, with an optional version rated to 92 Mbps.
The mesh itself is the point. It takes 64 nodes or more and routes over more than ten hops, in centreless, star, chain or mesh topologies, and a unit joins the network within five seconds of a warm boot. DES, AES128 and AES256 encryption are offered as options for deployments that need the traffic protected.
IP network video is accepted as standard, with HDMI or SDI input available on request. The robot supplies 12 V DC power and control, and both the controller and the software are essential to operating this payload rather than optional extras. Housing dimensions, weight and ingress rating are confirmed with the order.
Key Capabilities
- Extends the link where there is no network: A robot-carried relay station builds out a COFDM mesh so video and control reach back to the operator from places with no coverage of their own.
- 64 nodes and more than ten hops: Networking capacity is 64 nodes or more with routing over more than ten hops, in centreless, star, chain or mesh topologies.
- 52 Mbps peak, 92 Mbps optional: Peak capacity is 52 Mbps on a 20 MHz carrier, and an optional version is rated to 92 Mbps.
- 4 W transmit power at 1300–1500 MHz: Receiver sensitivity is −100 dBm at 5 MHz, with carrier bandwidth configurable at 5, 10 or 20 MHz.
- Rejoins the network in five seconds: A unit joins the mesh within five seconds of a warm boot, which matters when nodes move in and out of range during a task.
- Optional AES256 encryption: DES, AES128 and AES256 are offered as options where the traffic has to be protected.
- Modest power budget: The station runs on DC 12 V with typical consumption at or below 21 W and peak consumption at or below 35 W.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Torrfood |
|---|---|
| Model | ST9904USV-02 |
| Product Type | COFDM mesh network relay station |
| Compatible Platforms | Deep Robotics X30 and M20 |
| Operating Frequency | 1300–1500 MHz |
| Carrier Bandwidth | 5 / 10 / 20 MHz, configurable |
| Transmission Scheme | COFDM |
| Modulation | BPSK / QPSK / 16QAM / 64QAM, adaptive |
| Transmission Capacity | Peak 52 Mbps at 20 MHz; optional version up to 92 Mbps |
| Transmit Power | 4 W |
| Receiver Sensitivity | −100 dBm at 5 MHz |
| Video Input | IP network video; HDMI or SDI input available on request |
| Networking Capacity | 64 nodes or more |
| Routing Hops | More than 10 |
| Network Join Time | Within 5 seconds of a warm boot |
| Network Topologies | Centreless, star, chain and mesh |
| Encryption | DES / AES128 / AES256 (optional) |
| Power Supply | DC 12 V |
| Power Consumption | Peak ≤ 35 W; typical ≤ 21 W |
| Robot Interface | Power and control supplied by the robot |
| Controller Interface | Essential |
| Software Interface | Essential |
| Dimensions | Confirm at quote |
| Weight | Confirm at quote |
| Ingress Protection | Confirm at quote |
Industries
Frequently Asked Questions
It lets a robot carry the network with it. The station extends a COFDM mesh as the robot moves into tunnels, basements or damaged structures, so video and control keep reaching the operator.
Capacity is 64 nodes or more with routing over more than ten hops, in centreless, star, chain or mesh topologies.
Peak capacity is 52 Mbps on a 20 MHz carrier, and an optional version is rated to 92 Mbps. Modulation adapts between BPSK, QPSK, 16QAM and 64QAM.
DES, AES128 and AES256 are available as options. Tell us which your deployment requires when you order, because it is specified rather than standard.
IP network video is supported as standard. HDMI or SDI input is available on request, so raise it before ordering if your camera is not IP.
The Torrfood ST9904USV-02 Mesh Network Relay Station is priced at SAR 82,500 in your market.
Torrfood ST9904USV-02 Mesh Network Relay Station
- Regular price
- SAR 82,500.00
- Sale price
- SAR
Recently Viewed
You haven't viewed any products yet.
