{"product_id":"ti5-cra-ri60-80-lightweight-joint-module","title":"Ti5 CRA-RI60-80 Lightweight Joint Module","description":"\u003cp\u003eThe CRA-RI60-80 is the heavier-framed member of the Ti5 60-series: the same drive as the CRA-RI60-70 in a bigger housing. Base build mass is 1.03 kg against the 60-70's 0.73 kg, 1.2 kg against 0.88 kg for the extended body, and 1.04 kg against 0.76 kg for the EtherCAT-capable build.\u003c\/p\u003e\u003cp\u003eApart from mass the two frames share the same numbers. Gear ratios of 51, 81, 101 and 121 give 42, 53, 66 and 66 N·m peak torque at 82, 51, 41 and 32 RPM; allowable torque at average load runs from 32 N·m to 49 N·m; gear backlash is 20 arcsec on the two lower ratios and 10 arcsec on the two higher ones; and the platform is 300 W at 24–48 V with 5 A rated current, 6.7 A maximum continuous current, a 0.096 N·m\/A torque constant and an 18 mm hollow shaft. Where the two differ beyond mass is marginal: this frame's extended body is 91.5 mm against 93 mm, and its EtherCAT build is 72.5 mm against 74 mm. The decision between the two is therefore mechanical fit and moving mass, and it is confirmed with the quotation.\u003c\/p\u003e\u003cp\u003eThree builds are fully specified. The base CRA-RI60-80-PRO-2-XXX is 72.5 mm at 1.03 kg with a 16-bit encoder on CAN. The -B build extends to 91.5 mm at 1.2 kg with rotor inertia rising from 394.8 to 492 g·cm². The -2E-EC build stays at 72.5 mm and 1.04 kg and adds a 16\/18-bit encoder option with EtherCAT alongside CAN. The -B-2E-EC designation completes the family, and its figures are confirmed with the quotation.\u003c\/p\u003e\u003cp\u003eLike the rest of the line this is a joint for designers to build around — humanoid shoulders and elbows, collaborative arm axes, legged and multi-axis research rigs — where a joint is specified, serviced and replaced as one unit. Structure, controller, power and software are the integrator's.\u003c\/p\u003e\u003ch3\u003eKey Capabilities\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSame 60-frame drive, heavier housing:\u003c\/strong\u003e Gear ratios, torque and speed tables, backlash and electrical ratings match the CRA-RI60-70's figures; the difference is mass, 1.03 kg against 0.73 kg for the base build.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour gear ratios:\u003c\/strong\u003e 51:1 gives 42 N·m peak at up to 82 RPM, 81:1 gives 53 N·m at 51 RPM, and 101:1 and 121:1 both give 66 N·m at 41 and 32 RPM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e49 N·m allowable at average load:\u003c\/strong\u003e At 101:1 and 121:1 the module is rated for 49 N·m at average load and 30 N·m at a 2000 RPM input speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300 W electrical platform:\u003c\/strong\u003e All builds run from 24–48 V at 5 A rated and 6.7 A maximum continuous current, with a 0.096 N·m\/A torque constant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree fully specified builds:\u003c\/strong\u003e 72.5 mm at 1.03 kg for the base unit, 91.5 mm at 1.2 kg for the extended -B body, and 72.5 mm at 1.04 kg for the -2E-EC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEtherCAT without added length:\u003c\/strong\u003e The -2E-EC build keeps the 72.5 mm base length while adding a 16\/18-bit encoder option and EtherCAT alongside CAN.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFourth build confirmed at quote:\u003c\/strong\u003e The -B-2E-EC designation combines the -B and -2E-EC suffixes, and its figures are confirmed with the quotation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.\u003c\/p\u003e\u003ch3\u003eBuying through Robotix Market\u003c\/h3\u003e\u003cp\u003eThis unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.\u003c\/p\u003e","brand":"Ti5 Robotics","offers":[{"title":"Default Title","offer_id":68065848983782,"sku":"Ti5-Robotics-Joint-Module-60-80","price":0.0,"currency_code":"SAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0827\/3366\/2438\/files\/ti5-robotics-joint-module-60-80-1.png?v=1794975016","url":"https:\/\/robotixmarket.me\/en\/products\/ti5-cra-ri60-80-lightweight-joint-module","provider":"Robotix Market Middle East","version":"1.0","type":"link"}