- 30 active degrees of freedom Two at the head, seven per arm, two at the waist and six per leg, on a body of about 41 kg with end effectors and battery.
- 6-DOF dexterous hands as standard The base RP1 ships with dummy hands, so manipulation work can begin without sourcing end effectors separately.
- Interaction head with an RGB camera A monocular RGB camera is standard equipment here, where the base version has no standard visual sensor at all.
- RK3588 plus A733 and an Orin NX 16 GB The development computer is part of the specified configuration rather than an unnamed option.
- Speaker, microphone and screen Voice control is offered alongside remote and app control, which makes the Pro the variant for interaction experiments.
- Hot-swappable dual battery A large-and-small pack arrangement allows a battery change without shutting the robot down, with about three hours per charge.
- Open hardware and software stack Drawings, bills of materials, PCB information, 3D models, motor drivers, gait algorithms, ROS 2 middleware, an SDK, simulation and training code are all published.
Description
The RoboParty RP1 Pro is the fully equipped version of the ROBOTO 01 open humanoid development platform. It has 30 active degrees of freedom — two at the head, seven per arm, two at the waist and six per leg — against the base RP1's 24, and a mass of about 41 kg with end effectors and battery. The extra articulation sits where interaction and manipulation research needs it: a moving head and a seventh arm joint.
The Pro also arrives equipped rather than bare. Its standard interaction head carries a monocular RGB camera, its standard end effectors are 6-DOF dexterous hands instead of dummy hands, and its computing is an RK3588 plus A733 base arrangement with an Orin NX 16 GB for development work. Interaction hardware adds a microphone and a screen to the speaker, and voice control joins remote and app control.
The chassis, the motion envelope and the power system are the same on both versions: 1.35 m tall and 1350 x 450 x 200 mm standing, a 250 mm thigh, a 300 mm calf and a 550 mm arm in AL6061/7075 aluminium alloy, engineering plastics and rubber; up to 4 m/s, a 30 degree climb, a 50 mm step and a 3 kg payload, its split between the arms confirmed with the quotation; and a 10 Ah pack good for three hours, charged in 1.5 hours over USB-C or magnetically, in a large-and-small dual-battery arrangement that can be swapped without a shutdown and used while charging. The safety design is shared too: enclosed joints, remote and wearable emergency stops, three-channel stop redundancy and a -10 to 40 degree C operating range.
Open development is the reason either version exists. RoboParty publishes module and body drawings, bills of materials, interface definitions, PCB information and 3D models for the hardware, and motor drivers, gait algorithms, perception and decision models, ROS 2 middleware, an SDK, simulation environments and training code for the software — so a mechanical change can be followed through the control stack and back into a learning experiment. Which repository release is current is worth checking before an implementation is scheduled.
Key Capabilities
- 30 active degrees of freedom: Two at the head, seven per arm, two at the waist and six per leg, on a body of about 41 kg with end effectors and battery.
- 6-DOF dexterous hands as standard: The base RP1 ships with dummy hands, so manipulation work can begin without sourcing end effectors separately.
- Interaction head with an RGB camera: A monocular RGB camera is standard equipment here, where the base version has no standard visual sensor at all.
- RK3588 plus A733 and an Orin NX 16 GB: The development computer is part of the specified configuration rather than an unnamed option.
- Speaker, microphone and screen: Voice control is offered alongside remote and app control, which makes the Pro the variant for interaction experiments.
- Hot-swappable dual battery: A large-and-small pack arrangement allows a battery change without shutting the robot down, with about three hours per charge.
- Open hardware and software stack: Drawings, bills of materials, PCB information, 3D models, motor drivers, gait algorithms, ROS 2 middleware, an SDK, simulation and training code are all published.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | RoboParty |
|---|---|
| Manufacturer | RoboParty |
| Model | ROBOTO 01 (RP1 Pro) |
| Product Type | Open humanoid robot development platform |
| Active Degrees of Freedom | 30 (2 head, 7 per arm, 2 waist, 6 per leg) |
| Mass | Approx. 41 kg with end effectors and battery |
| Height | 1.35 m |
| Standing Dimensions | 1350 x 450 x 200 mm (height x body width x body depth) |
| Limb Lengths | Thigh 250 mm, calf 300 mm, single arm 550 mm |
| Body Materials | AL6061/7075 aluminium alloy, engineering plastics, special rubber |
| Maximum Running Speed | Up to 4 m/s |
| Climbing Capability | 30 degrees |
| Maximum Step Crossing | 50 mm |
| Obstacle Avoidance Minimum Size | 50 mm |
| Payload | 3 kg (split between arms and hands confirmed with the quotation) |
| Joint Modules | Four in-house designs, two-stage planetary with inner-rotor structure |
| Peak Torque | 160 N·m, associated with the 100 mm outer-diameter module only |
| Battery | 10 Ah, approx. 3 hours runtime, 1.5 hour charge, dual-battery hot swap |
| Charging | USB-C and magnetic; operation while charging supported |
| Standard Head | Interaction head with monocular RGB camera |
| Standard End Effectors | 6-DOF dexterous hands |
| Base Computing | RK3588 + A733 |
| Development Computing | Orin NX, 16 GB |
| Inertial Sensing | High-precision six-axis IMU |
| Interaction Equipment | Speaker, microphone, screen; remote, app and voice control |
| Connectivity | Wi-Fi 6, Bluetooth 5.2, 4G |
| Ports | 2x USB Type-A, 2x USB Type-C, 2x RJ45 |
| Optional Sensing | Intel D435i depth camera; perception head adds 3D LiDAR; data-collection head uses a binocular RGB camera |
| Optional Hands | Dexterous hands at 6 or 22 DOF, or grippers |
| End-Effector Wiring | 24 V, with provision for an adapter board |
| Operating Temperature | -10 to 40 degrees C |
| Safety Design | Enclosed joints, remote and wearable emergency stops, three-channel stop redundancy |
| Open Resources | Drawings, BOM, interfaces, PCB data, 3D models, drivers, gait algorithms, ROS 2, SDK, simulation, training code |
| Charging Power Rating | Confirm at quote |
| Price | Quotation only |
Industries
Frequently Asked Questions
It is the higher-specification variant of RoboParty's open ROBOTO 01 humanoid development platform, with 30 active degrees of freedom and published hardware and software development resources.
Six more active degrees of freedom, including two at the head and a seventh per arm; about 41 kg against 39 kg; a standard interaction head with a monocular RGB camera; 6-DOF dexterous hands instead of dummy hands; an RK3588 plus A733 base arrangement with an Orin NX 16 GB development computer; and a microphone, screen and voice control.
The standard interaction head carries a monocular RGB camera. The Intel D435i depth camera remains an option, and the combined depth-camera and 3D LiDAR arrangement belongs to the perception-head configuration, which has to be selected.
The payload is 3 kg. How that load divides between the arms or hands is confirmed with the quotation, so it should not be read as a per-hand lifting rating.
No. RoboParty associates that peak torque specifically with the 100 mm outer-diameter joint module, and peak values describe short-duration conditions rather than continuous output. Four different in-house joint modules are used across the body.
It is offered by quotation — the version, supplied hands, sensors, computing modules, battery equipment and documentation revision all shape the configuration and are confirmed per project.
Recently Viewed
You haven't viewed any products yet.
