- Dual-Disc Brushes at 25 kg Pressure Two disc brushes apply a consistent 25 kg of down pressure, which is what removes stubborn ground-in stains rather than simply wetting them.
- 68 cm Minimum Path Clearance A 68 cm minimum clearance keeps the robot usable around carts, fixtures, temporary obstacles and pedestrian traffic in working retail and healthcare corridors.
- AI Spot Scrubbing Common wet stains such as coffee, sauces and puddles are detected in real time, and the robot generates targeted cleaning routes so response does not wait for the next scheduled pass.
- Rear AI Cleaning-Performance Detection A rear-facing AI camera checks for leftover stains after each task and can trigger spot re-cleaning or generate heatmaps for operational review — proof of cleaning, not just a completed route.
- Quick-Release Magnetic Disc Brushes Magnetic quick-release discs turn pad changes into a routine floor-staff task rather than a maintenance intervention.
- Facility Connectivity and Optional Workstation Pudu Link, elevator and e-gate integration, Wi-Fi, Bluetooth, 4G and optional LoRa keep the robot connected, while the optional workstation adds charging, water refill, drainage and self-cleaning.
Description
The PUDU CC1 Pro Disc is a mid-size commercial cleaning robot built around deep floor scrubbing. Its dual-disc brush system applies a consistent 25 kg of down pressure to lift stubborn stains, while a 68 cm minimum path clearance keeps it agile enough to work around carts, fixtures, temporary obstacles and pedestrians — the trade-off that decides whether a scrubber can actually run in a busy retail or hospital corridor.
Positioning uses PUDU VSLAM+ with LiDAR fusion, which removes the need for QR-code infrastructure and keeps mapping reliable across large indoor spaces. On top of that, AI spot scrubbing detects common wet stains such as coffee, sauces and puddles in real time and generates targeted cleaning routes to reach them quickly. A rear AI camera then checks the work: cleaning-performance detection monitors leftover stains after each task and can trigger spot re-cleaning or produce heatmaps for operational review — closing the loop between cleaning and proof of cleaning.
The specification is sized for mid-scale duty. Cleaning width is 380 mm, with 700 to 1000 m²/h of all-covered scrubbing and 1500 to 3000 m²/h of spot scrubbing at 0.2 to 1.2 m/s. A 69 Ah battery gives up to 5.3 hours of scrubbing, or 3.8 hours or more in standard mode, and charges in about 4.5 hours. Water is carried in 15 L clean and 15 L dirty tanks, and the robot weighs 80 kg at 629 x 552 x 695 mm with a 10.1-inch LCD screen. Quick-release magnetic disc brushes make pad changes a routine task rather than a maintenance job.
Connectivity covers Pudu Link, elevator and e-gate integration, Wi-Fi, Bluetooth and 4G, with optional LoRa, and an optional workstation adds charging, water refill, drainage and self-cleaning. Typical environments are shopping centres, supermarkets, hotels, campuses, medical buildings, transportation terminals and managed real-estate spaces.
Units are sourced new through established distribution channels and arrive with the full manufacturer warranty. Robotix Market ships worldwide and coordinates after-sales support with Pudu's service network; on-site installation and commissioning are not included.
Features
Specs
| Brand | PUDU |
|---|---|
| Model | CC1 Pro Disc |
| Product Type | AI-native mid-size disc scrubber-dryer robot (scrubbing and polishing) |
| Scrubbing System | Dual-disc brushes, 25 kg down pressure, quick-release magnetic discs |
| Cleaning Width | 380 mm |
| Navigation | PUDU VSLAM+ with LiDAR fusion positioning; no QR-code infrastructure required |
| Cleaning Efficiency and Speed | 700-1000 m2/h all-covered scrubbing; 1500-3000 m2/h spot scrubbing; 0.2 to 1.2 m/s |
| Water Tanks | 15 L clean water, 15 L dirty water |
| Battery and Runtime | 69 Ah; up to 5.3 h scrubbing, 3.8+ h in standard mode; charging approx. 4.5 h |
| Dimensions, Weight and Display | 629 x 552 x 695 mm; 80 kg; 10.1-inch LCD screen |
Industries
Frequently Asked Questions
It is an AI-native commercial scrubber-dryer robot for automated floor scrubbing and polishing in retail, hospitality, healthcare, transportation, education and large public facilities.
It uses PUDU VSLAM+ with LiDAR fusion positioning, so no QR-code infrastructure is needed and mapping stays reliable across large indoor spaces. A 68 cm minimum path clearance lets it work around carts, fixtures and pedestrians.
Dual-disc brushes apply a consistent 25 kg of down pressure, and AI spot scrubbing detects wet stains such as coffee, sauces and puddles in real time and generates targeted cleaning routes. A rear AI camera then detects leftover stains and can trigger spot re-cleaning.
A 69 Ah battery supports up to 5.3 hours of scrubbing, or 3.8 hours or more in standard mode, and charges in about 4.5 hours. Cleaning efficiency is 700 to 1000 m2/h all-covered scrubbing and 1500 to 3000 m2/h spot scrubbing, with 15 L clean and 15 L dirty water tanks.
It is supplied on a quotation basis with no published list price. Pricing depends on configuration, workstation and connectivity options and destination, and is confirmed during quotation along with warranty scope and delivery schedule.
Recently Viewed
You haven't viewed any products yet.
